Tannoy iw62 TS

The iw62 TS is unique in that it can operate in either passive or active mode, selectable by a switch on the front baffle. In active mode an external controller can be used to manage low frequency extension, the application of equalisation and allowing the crossover point to be tailored to the rest of the system and room. Additionally the iw62 TS will operate in stereo or mono mode; easily converted by means of link wires on the circuit board.



The driver and passive frequency dividing network are mounted in an injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material.

The excellent structural integrity, when combined with the secure polycarbonate, self-aligning eight clamp mounting system, ensures a performance enhancing rigid acoustic coupling with the wall surface. This provides an immensely stable platform for the drivers to deliver optimum performance.



Robust, gold plated spring loaded terminals enable rapid connection with optimum input signal integrity. Complementing any style of decor, the perforated metal grille and discreet moulded baffle can be painted to blend seamlessly with any install environment.

A steel back can is available as an optional accessory.





PERFORMANCE

System Type In-wall subwoofer

Frequency Response - 6dB 29Hz-110Hz passive (determined by controller in active mode)

Low Frequency Alignment - 6dB 29Hz passive (determined by controller in active mode)

Recommended Amplifier Power 100 - 400W

Power Handling Average: 200W

Programme: 400W

Peak: 800W

Sensitivity 2.83 Volts @ 1 metre Half Space: 94dB

Maximum SPL@ 1 metre Average: 117dB

Peak: 123dB

Impedance Stereo: 8 Ohms

Mono: 4 Ohms

DRIVE UNIT

Driver Complement 2 x 165mm (6.50\\\\\\" ) drive units with long throw multi fibre paper pulp cones

CROSSOVER

Crossover Passive 110Hz

Active determined by controller

CONSTRUCTION

Finish White - paintable

Connectors Gold plated spring terminals

Dimensions (H x W) Front Baffle: 473.50 x 227mm

(18.68 x 8.94\\\\\\")

Mounting Panel Thickness: 25mm Maximum

Cut-out Dimensions (H x W) 426.1 x 187.6mm

(16.78 x 7.39\\\\\\")

Rec. in-wall Mounting Volume 30 litres

(1.1 cu.ft.)

Mounting Depth 95.50mm

(3.76\\\\\\")

Weight (each) 6.5kg

(16.3lbs)



Accessories Pre-installation ring

Back can