Tannoy iw62 TDC

 The drivers and passive frequency dividing network are mounted in an injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material.



The class leading performance is further enhanced by the inclusion of eight self aligning, spring loaded clamps; allowing for quick install but also for simple removal or reorientation of the loudspeaker. The rigidity of the clamps and baffle combination crucially provides the acoustically optimum bond to the wall surface without risk of distortion to the baffle itself. Complementing any style of decor, the perforated metal grille and discreet moulded baffle can be painted to blend seamlessly with any environment.



Gold plated spring loaded terminals are provided for ease of installation and a steel back can is available as an optional installation accessory.





PERFORMANCE

System Type In-wall loudspeaker

Frequency Response (1) 70Hz - 51kHz (+/-3dB)

Low Frequency Alignment (2) 34Hz (-6dB)

Recommended Amplifier Power 20 210W @ 8 Ohms

Power Handling (3) Average: 105W

Programme: 210W

Peak: 420W

Sensitivity 2.38 Volts @ 1 metre (1) Anechoic: 92dB

Half space: 95dB

Maximum SPL @ 1 metre (4) Average: 112dB

Peak: 118dB

Impedance 8 Ohms

DRIVE UNIT

Dispersion 90 degrees

Driver Complement SuperTweeter: 25mm (1.00) titanium dome

Dual Concentric: 165mm (6.50)

Bass driver: 165mm (6.50)

CROSSOVER

Frequency 750Hz, 1.8kHz, 16kHz

Type Passive

OPTIONAL THP 60 TRANSFORMER

Maximum SPL (4) 107dB

Wattage Tap Selections 60, 30, 15, 7.5 Watts

CONSTRUCTION

Finish White paintable

Connectors Gold plated spring terminals

Dimensions (H x W) Front Baffle: 473.5 x 227mm

(18.64 x 8.94)



Maximum wall thickness: 25mm (1.00)

Cut-out Dimensions (H x W) 426.10 x 187.60mm

(16.76 x 7.39\\\")

Rec. in-wall Mounting Volume 30 litres

(1.1 cu.ft.)

Mounting Depth 99mm

(3.89)

Weight (each) 5kg

(11lbs)



Accessories Pre-installation ring

Back can

Back can with 60 Watt transformer