Tannoy CMS801BM sub

The two CMS801 subwoofer model versions and a separate back can satisfy the vast majority of installation application requirements:

CMS801 sub BM (Blind Mount) - supplied with an integral back can.

CMS801 sub PI (Pre-Install) - supplied without a back can.

CMS801 PI Back Can (Pre-Install back can) - use with the CMS801 sub PI.



CMS801 sub BM: this model is equipped with a low insertion loss 60W line transformer mounted within the back can. This is easily configurable to the following settings via front baffle mounted rotary tapping switch:

70V systems: 60W / 30W / 15W / 7.5W / OFF & low Impedance operation

100V systems: 60W / 30W / 15W / OFF & low Impedance operation



CMS801 sub PI: a version supplied without back can or onboard transformer.

NOTE: For optimum performance and full compliance with safety ratings Tannoy recommends using this model with the CMS801 PI back can accessory option in which the transformer is pre-fitted.





System

Frequency Response (-3dB) 1 58Hz - 160Hz

Frequency Range (-10dB) 1 42Hz - 300Hz

System Sensitivity (1W @1m) 2 92dB (1W = 2.45V for 6 Ohms)

Rated Maximum SPL Average 112dB

Peak 118dB

Average (with THP60) 110dB

Power Handling Average 100W

Programme 200W

Peak 400W

Recommended Amplifier Power 200W @ 6 Ohms

Nominal Impedance 6 Ohms

Transformer Taps (via front rotary switch) 70V: 60W / 30W / 15W / 7.5W / OFF & Low Impedance operation



100V: 60W / 30W / 15W / OFF & Low Impedance operation

Distortion 10% Full Power (7.75V)

2nd Harmonic

70Hz: 1.22%

100Hz: 0.38%

3rd Harmonic

70Hz: 1.90%

100Hz: 0.49%



1% Full Power (2.45V)

2nd Harmonic

70Hz: 0.91%

100Hz: 0.04%

3rd Harmonic

70Hz: 1.28%

100Hz: 0.44%

Crossover Integral 2nd order passive, 160 Hz

Transducer 1x 200mm (8.00\\\\\\") Long throw woofer with multi fibre paper pulp cone

Physical

Enclosure

Backcan Zinc plated steel

Baffle Reflex loaded UL 94V-0 rated ABS

Grille Steel, with weather resistant coating

Safety Features Safety ring located at rear of enclosure for load bearing safety bond

Clamping Design Security toggle clamp

Backcan Options

Blind Mount (BM) Complete with fixed back can

Pre Install (PI) Separate back can for pre-installation

Cable Entry Options Cable clamp & squeeze connector for conduit up to 22mm

Conduit Knockouts 3 Sets of horizontal positions 19 / 22 / 28mm

0.75 / 0.87 / 1.10\\\\\\"

Connectors Removable locking connector with screw terminals with \\\\\\"loop through\\\\\\" facility

Safety Agency Ratings (pending) UL-1480, UL-2043, CE

BM Hole cutout Diameter 295mm (11.61\\\\\\")

PI Hole Cutout Diameter 295mm (11.61\\\\\\")

Dimensions

Bezel Diameter 325mm (12.80\\\\\\")

BM model: Front of ceiling to rear of back can 310.5mm (12.22\\\\\\")

BM model: Front of ceiling to top of safety loop 327.8mm (12.90\\\\\\")

PI model: Front of ceiling to rear of speaker unit 117.50mm (4.63\\\\\\")

PI model: Front of accessory back can bezel to top of safety loop (PI) 168.5mm (6.63\\\\\\")



Net Weight (ea)

CMS801 SUB BM 6.3kg (13.89lbs)

CMS801 SUB PI 3.2kg (7.05lbs)

PI Backcan 4kg (8.81lbs)

Included Accessories C Ring

Tile bridge

Paint mask

Cutout template

Grille

Optional Accessories Plaster (mud) ring

Back can for PI model