Palmer RIVER kyll - Passive 2-Channel Line Isolation Box
Tip produs: echipamente audio | echipamente dj | echipamente audio constantaProducator: Palmer
1% reducere pentru contactele prin clubafaceri.ro
Prezentare Palmer RIVER kyll - Passive 2-Channel Line Isolation Box
Consumer devices, as well as many professional keyboards such as synthesisers and digital pianos as well as some small mixers have unbalanced outputs. In order to connect them to a professional sound system and to avoid interfering noise over long cable runs, balanced signal routing is needed. For this purpose, the Palmer kyll handles the necessary signal balancing.
Due to the galvanic isolation via a transformer, the kyll also eliminates ground loops. To do this, simply engage the ground lift switch. Devices that already have balanced outputs also benefit from this, since noise can occur even here. The Palmer kyll reliably eliminates hum and buzz.
The Palmer kyll is capable of very high levels. Compared to conventional line isolators for media applications, it can process much \"hotter\" input signals without unwanted distortion being audible: up to + 20 dBu! But the kyll can also process quieter signals without causing any sound alteration or noise, because it works purely passively with large isolating transformers. This makes the Palmer kyll extremely easy to use and fail-safe, as it requires neither batteries nor phantom power. Conveniently, the inputs are designed as combo sockets that accept jack or XLR connectors. Adapters are unnecessary! The balanced outputs are designed as professional XLR sockets.
The kyll line isolation box is a universal problem solver for eliminating humming ground loops. When connecting unbalanced equipment, the signal is simultaneously balanced. Whether at home, at lectures, in the rehearsal room, on stage, in clubs or at large events, the Palmer kyll ensures a clean sound without noise.
Date tehnice:
For connecting devices with unbalanced or balanced outputs to PA systemsReliably eliminates ground loop hum and interfering signalsGalvanic transformer isolationTwo channels for stereo or two independent signalsCombo inputs, can be used with XLR connectors or jacks2 balanced XLR outputsDistortion free up to +20dBuNo power supply requiredSolid casing made of aluminium and steelIncl. rewritable tour label for attachment onto the back of the kyllEngineered in GermanyProduct typeline isolatorChannels2TypepassiveTransformer isolatedYesInputs2input typebalanced/ unbalancedInput connectors6.3 mm jackInput connectorsXLROutputs2Output typebalancedOutput connectorsXLRGround lift switchYesHousingAluminium continuous castingDimension (H/W/D)140 x 50 x 98 mmWeight0,69 kgAmbient temperature during operation-20 - 70 °CRelative Humidity< 80 %, not condensingAccessories (included)Inscription label (tour label)Accessories (included)rubber feetAudioMax. input level (< 1% THD, 20 Hz)+ 20 dBuMax. input level (< 1% THD, 1 kHz)+ 32 dBuFrequency response (±0,2dB, relative 1kHz)10 Hz - 50 kHzInput impedance (1 kHz)9.3 kOhmOutput impedance (1 kHz)260 Ohm(s)THD (30 Hz, +4 dBu, unity, unweighted)< 0,9 %THD (1 kHz, +4 dBu, unity, unweighted)< 0,02 %IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu)< 0,01 %Transformer ratio1 : 1S**************************
va rugam sa va autentificati accesand urmatorul buton: