Amplificator Powersoft T602
Tip produs: echipamente audio | echipamente dj | echipamente audio constantaProducator: Powersoft Audio
1% reducere pentru contactele prin clubafaceri.ro
Prezentare Amplificator Powersoft T602
2-Channel High-Performaqnce Amplifier Platform with DSP and Dante™
The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.
All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.
The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.
The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways.
Full control with a PC running Armonía. Here it can be in mixed groups with advanced EQ together with other Powersoft products.
Control from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
Group controllable advanced EQ with raised cosine filters
Large preset library
Preset compatibility with X Series
Very long FIR filters (42.6 ms)
Control and monitoring through ArmoníaPlus
Date tehnice:
General
Number of channels
2
Output power
Single channel mode
Bridge mode
4 Ω
8 Ω
8 Ω
2500 W
1300 W
5000W
Max output voltage / current
145 Vpeak / 100 Apeak
AC Main Power
Power supply
Universal, regulated switch mode
Nominal power requirement
100-240 V ±10%, 50-60 Hz
Operating voltage
90 V - 264 V
Power consuption**
115 V
230 V
Idle
32 W
32 W
1/8 of max output power @ 4 Ω
824 W
7.6 A
839 W
4.3 A
Thermal
Operating temperature range
0° - 45° C - 32° - 113° F
Thermal dissipation**
115 V
230 V
1/8 of max output power @ 4 Ω
678 BTU/h
170.9 kcal/h
731 BTU/h
184.2 kcal/h
AUDIO
Gain
32dB
Input sensitivity
2.57 Vrms
Max input level
24dBu
Frequency response
20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio
> 110 dB (20 Hz - 20 kHz, A weighted)
Crosstalk separation
<-70 dB @ 1kHz
THD+N
< 0.1% (typical < 0.5%)
IMD
< 0.1% (typical < 0.5%)
Input impedance
20 kΩ balanced
DSP
AD Converter
24 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range - 0.005% THD+N
DA Converter
24 Bit Tandem™ @ 48 kHz 117 dB-A Dynamic Range - 0.003% THD+N
Memory/presets
256 MB (RAM) plus 512 MB flash for presets /
Input equalizer
Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossover
linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Delay
2 s (input) + 100 ms (output) for time alignment
Limiters
TruePower™, RMS voltage, RMS current, Peak limiter
Damping control
Active DampingControl™ and LiveImpedance™ measurement
Front panel
Indicators and Controllers
8 x Push-button - Setting operating parameters
1 x Display - Settings and monitoring
1 x Power switch -
Connectors
AC main
1 x IEC C20 connector - 20 A max (region-specific power cord provided)
Audio signal input
2 x XLR - Signal input
Loudspeakers
2 x speakON - Neutrik NL4MD
Network/data
1 x Rj45 socket - RS485 data connection (non-DSP version)
1 x Rj45 socket - DANTE®
Construction
Dimensions (L x H x W)
484 mm x 44.5 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
Weight
7.5 kg (16.5 lb)
* Data is subject to change without notice.
S**************************
va rugam sa va autentificati accesand urmatorul buton: