S******************** Prezentare firma Produsele firmei Contact

Tannoy Di5a Boxa profesionala activa

Tip produs: boxa activa | boxa profesionala | boxe active
Producator: Tannoy
3% reducere pentru contactele prin clubafaceri.ro

Prezentare Tannoy Di5a Boxa profesionala activa

Specificatii Tehnice

The Di5 speaker cabinet is available in either black or white with matching rubber trims. Further architectural modification is possible by factory fit application of alternative red or blue colour trims. Two standard colour trim options are available from stock; enabling black or white product to be supplied factory pre-fitted with either red or blue trims.

Other trim colours can also be created to suit specific requirements, but only as a special order customisation subject to minimum order quantities. Primarily this is aimed at corporate branding applications, where this aesthetic flexibility will enable colour coordination for larger installs.

Hardware options: A multi position yoke bracket is supplied for easy and rapid installation and an optional accessory pole mount adaptor kit is also available.

Frequency Response (-3dB) (1) 100Hz - 25kHz

Frequency Range (-10dB) (1) 90Hz - 30kHz

Dispersion (-6dB) 90 degrees conical

Driver Complement High Frequency

25mm (1.00\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\") ICT

Low Frequency

110mm (4.50\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\") mineral loaded polypropylene

Crossover 7kHz inductively coupled ICT

Directivity Factor (Q) 5.3 averaged 1kHz to 10kHz

Directivity Index (DI) 6.6 averaged 1kHz to 10kHz

Rated Maximum SPL (2) Average: 103dB

Peak: 109dB

Power Output 30W RMS

Distortion 10% Full Power (4.25V)

2nd Harmonic

250Hz: 1.33%

1kHz: 0.62%

10kHz: 1.43%

3rd Harmonic

250Hz: 0.25%

1kHz: 0.16%

10kHz: 0.35%

1% Full Power (1.34V)

2nd Harmonic

250Hz: 0.41%

1kHz: 0.23%

10kHz: 0.32%

3rd Harmonic

250Hz: 0.10%

1kHz: 0.07%

10kHz: 0.18%

Input Sensitivity

(for maximum input) Balanced: 775mV

Unbalanced: 500mV

Input Impedance Balanced: 11kOhm

Unbalanced: 7kOhm

Protection Circuitry Thermal

Soft Limiting

Supply 100 - 240V AC, 50 - 60Hz

Fuse T1AL 250V

Power Consumption 76VA maximum

Construction

Enclosure High impact polystyrene (HIPS),

Grille Steel

Finish Textured black or white paint with matching rubber trims

Factory fitted custom trim colours available to special order

Connectors 6 way euro-type input / output connector

Unbalanced RCA (phono) input

Mains inlet IEC type C13

PREZENTARE S********************

MEMBRU
GRATUIT S********************

2 150 636 accesari

Pentru a vizualiza datele companiei
S********************
va rugam sa va autentificati accesand urmatorul buton:

Activitate firma: instrumente muzicale - piane - chitari