Marshall Vintage Modern 100W Head and 425A/B Cabinet
Producator: Marshall3% reducere pentru contactele prin clubafaceri.ro
Prezentare Marshall Vintage Modern 100W Head and 425A/B Cabinet
The Marshall Vintage Modern 2466 Half-Stack includes the Vintage Modern 2466 Tube Amp Head and Vintage Modern 425A angled speaker enclosure.
The Marshall Vintage Modern 2466 Tube Amp Head is an all-valve amplifier with a choice of two dynamic ranges selectable by footswitch. The Low range delivers the performance you would expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.
Two frequency selective Pre-amp Volumes (Gains) - Body and Detail - facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with four KT66 output valves yielding that substantial, fat and smooth tone. A MID Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.
A master volume has been included in order to practically manage the output levels at all venues. This is implemented after the phase splitter in order to fully exploit maximum preamp drive when the master is turned down low. A reverb level control mixes the on board plate reverb with the direct signal to whatever degree the player chooses. The reverb can be toggled on and off via the footswitch.
Finally, a series FX loop is provided for those players who wish to use outboard effects to further enhance their sound. Loop levels of 10dB and +4dB can be controlled via a rear panel switch as well as the option to completely bypass this feature if it is not required.
The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.
The Marshall Vintage Modern 425A angled speaker cab is a traditional Marshall 4 x 12 speaker cabinet in design. Mono/stereo switchable and loaded with G12C 25 Watt Celestion Greenbacks, this was specifically developed for the Limited Edition Jimi Hendrix Super100JH stack and are voiced to give that rich and balanced harmonic timbre that complements vintage tone and the Vintage Modern Series perfectly.
The cosmetics are also a carefully crafted hybrid of old and new styles made even more dramatic by the deep purple vinyl that covers the entire series.
Marshall 2466 and 425A or 425B Half Stack Specifications:
Head Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
Weight: 49.6 lbs (22.5 kg)
Impedance
Mono 16 Ohms/4 Ohms
Stereo 8 Ohms/8 Ohms
Dimensions 30.5" x 30" x 14.5" (770 x 755 x 365 mm)
Weight
425A: 79 lbs. (36 kg)
Marshall 2466 and 425A or 425B Half Stack Features:
100-Watt valve head
Valve compliment: 4 x ECC83 (12AX7s) in preamp, 4 x KT66 in power amp
Master Volume with two Gain Controls Detail (highs) & Body (lows)
Two footswitchable Dynamic Ranges Low & High
Mid Boost switch
Footswitchable Proprietary digital Plate Reverb
Series FX loop with level switch and bypass
Made in England
100-Watt, 4x12" cabinet
Angled front
Loaded with Celestion G12C 25 Greenbacks
Mono or Stereo switchable
16 Ohms/4 Ohms mono
8 Ohms stereo
Birch ply construction
"finger-locking" joints
Made in England
S********************
va rugam sa va autentificati accesand urmatorul buton: