Electro-Voice CPS-2T amplificator cu 70-Volt si 100-Volt O
Tip produs: amplificator profesional | amplificatoare profesionale | aplificatoare audioProducator: Electro-Voice
3% reducere pentru contactele prin clubafaceri.ro
Prezentare Electro-Voice CPS-2T amplificator cu 70-Volt si 100-Volt O
The Electro-Voice CPS-2T amplifier is a very high-quality power amplifier designed to elicit excellent performance from any speaker system as well as 70.7-volt and 100-volt lines. Its low distortion and substantial headroom ensure that program material will be accurately amplified. Each channel of the CPS-2T delivers more than 330 watts of continuous average power into eight ohms and 600 watts into four ohms. In its transformer-isolated dual mode, it can deliver more than 580 watts into 70.7-volt or 100-volt lines. In the bridged mode at one kHz, the amplifier can deliver more than 1,200 watts into eight ohms at less than one percent THD. Both direct and transformer-isolated outputs may be used simultaneously. The power supply, with its large toroidal transformer, gives the amplifier impressive headroom and current output.
Specifications
Amplifier Gain (dB)
36dB
Continuous rated power (1k Hz, THD 1%) 2Ω
850 Watts
Continuous rated power (1k Hz, THD 1%) 4Ω
600 Watts
Input Impedance (balanced)
20 kΩ
Continuous rated power (1k Hz, THD 1%) 8Ω
380 Watts
Continuous rated power
(20-20k Hz, THD<0,2%) 4Ω
500 Watts
Continuous rated power
(20-20k Hz, THD<0,2%) 8Ω
330 Watts
Maximum bridged output 4Ω
1700 Watts
Maximum bridged output 8Ω
1200 Watts
Continuous rated power (1k Hz, THD 1%) 100v
500 Watts
Continuous rated power (1k Hz, THD 1%) 70v
500 Watts
Electronics Type
Amplifier
Network Control (IRIS-Net)
No
Total harmonic distortion
< 0.05 %
Intermodulation Distortion (SMTPE)
< 0.08 %
Signal-to-noise ratio (A–weighted)
> 100 dB
Input Sensitivity
0dBu
Weight Net
22.5 kg ( 49.6 lbs )
Dimensions (HxWxD)
132.5 x 483 x 368.8 mm
(5.22" x 19.02" x 14.52")
S********************
va rugam sa va autentificati accesand urmatorul buton: