Palmer RIVER wupper - Passive Line Isolation Box
Tip produs: echipamente audio | echipamente dj | echipamente audio constantaProducator: Palmer
1% reducere pentru contactele prin clubafaceri.ro
Prezentare Palmer RIVER wupper - Passive Line Isolation Box
The more complex the setup, the higher the chance of ground loops. With the Palmer wupper Line Isolation Box, everything is quiet again so you can enjoy your audio without humming and buzzing.
The Palmer wupper is an isolation transformer in a robust aluminium and steel housing. It separates the ground potentials of two devices so that equalising currents are prevented and only your sound is transmitted - clean and without interference.
The Palmer wupper was developed for guitar and bass applications, but its brilliant, unaltered sound is just as suitable for keyboards and hi-fi equipment. The inputs and outputs with jack connections can be balanced or unbalanced. This means that the Palmer wupper can also be used to balance unbalanced signals, which allows longer cable runs without affecting the sound. Due to its passive design, the wupper requires neither batteries nor phantom power. This makes it extremely failure-proof.
The Palmer wupper is a simple, efficient humming killer: Connect it between two devices and the interference is gone. Sometimes it can be that simple!
Date tehnice:
Line isolation for guitar/bass/keyboard; also suitable for HiFis and car stereosSingle channel: Jack input and -outputReliably eliminates ground loop hum and interfering signalsGalvanic transformer isolationCan be used to balance signalsPure and unaltered soundPassive operation: simple and failure-proofDistortion-free up to +6 dBuSolid casing made of aluminium and steelIncl. rewritable tour label for attachment onto the back of the wupperEngineered in GermanyProduct typeline isolatorChannels1TypepassiveTransformer isolatedYesInputs1input typebalanced/ unbalancedInput connectors6.3 mm jackOutputs1Output typebalanced/ unbalancedOutput connectors6.3 mm jackGround lift switchnoHousingAluminium continuous castingDimension (H/W/D)110 x 50 x 50 mmWeight0,3 kgAmbient temperature during operation-20 - 70 °CRelative Humidity< 80 %, not condensingAccessories (included)Inscription label (tour label)Accessories (included)rubber feetAudioMax. input level (< 1% THD, 20 Hz)+ 10 dBuMax. input level (< 1% THD, 1 kHz)+ 32 dBuFrequency response (±0,2dB, relative 1kHz)20 Hz - 20 kHzInput impedance (1 kHz)17 kOhmOutput impedance (1 kHz)500 Ohm(s)THD (30 Hz, +4 dBu, unity, unweighted)< 0,09 %THD (1 kHz, +4 dBu, unity, unweighted)< 0,002 %IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu)< 0,002 %Transformer ratio1 : 1S**************************
va rugam sa va autentificati accesand urmatorul buton: