Palmer RIVER elde - Passive 2-Channel DI-Box
Tip produs: echipamente audio | echipamente dj | echipamente audio constantaProducator: Palmer
1% reducere pentru contactele prin clubafaceri.ro
Prezentare Palmer RIVER elde - Passive 2-Channel DI-Box
Are you looking to pick up the raw signal from a guitar, bass or keyboard without noise and tonal loss, even over long cable runs" That\'s exactly what the Palmer elde does - simply and reliably. Especially since the elde is a classic passive DI box, and it even has a dual-channel design. This means you can use it for stereo signals as well as for two different instruments.
The inputs are each looped to a Thru Out, allowing the signal to be passed on to the guitar/bass amplifier. For very high level signals, each channel has its own pad switch (-30 dB), so you can also insert the elde between the amplifier output and the loudspeaker. The output signals are balanced and with low impedance, so that they can withstand even longer cable runs without damage. Impedance conversion and balancing is done passively via a transformer, which also provides galvanic isolation. Each channel has its own ground lift switch to eliminate ground loops.
The Palmer elde is a high-quality two-channel di-box that is extremely easy to use. Due to its passive design, it requires neither batteries nor phantom power. This makes it extremely reliable and failure-proof. With its robust aluminium/steel housing, the Palmer elde easily withstands rough everyday use on stage, and with its clean, unaltered sound, it also excels perfectly in the recording studio.
Date tehnice:
Balancing and impedance matching for guitar/bass/keyboard synthesisersTwo-channel model for stereo signals or two instrumentsEliminates ground loop hum thanks to galvanic transformer isolationExtremely fail-safe, no power supply requiredThru-out for routing input signals to amplifiersPure and unaltered low-noise audioHandles even high-level inputs without distortionSwitchable 30 dB pad for extremely high input levels (e.g. amplifier output)Solid casing made of aluminium and steelIncl. rewritable tour label for attachment onto the back of the eldeEngineered in GermanyProduct typeDI boxChannels2TypepassiveTransformer isolatedYesInputs2input typeunbalancedInput connectors6.3 mm jackOutputs2Output typebalancedOutput connectorsXLRTHRU outputs per channel1Input attenuation (Pad)0 dB / 30 dBGround lift switchYesHousingAluminium continuous castingDimension (H/W/D)140 x 50 x 128 mmWeight0,66 kgAmbient temperature during operation-20 - 70 °CRelative Humidity< 80 %, not condensingAccessories (included)Inscription label (tour label)Accessories (included)rubber feetAudioMax. input level (< 1% THD, 20 Hz)+20 dBuMax. input level (< 1% THD, 1 kHz)+32 dBuFrequency response (±0,2dB, relative 1kHz)5 Hz - 80 kHzInput impedance (1 kHz)38.5 kOhmOutput impedance (1 kHz)25 Ohm(s)THD (30 Hz, +4 dBu, unity, unweighted)< 0,03 %THD (1 kHz, +4 dBu, unity, unweighted)< 0,002 %IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu)< 0,002 %Transformer ratio10 : 1S**************************
va rugam sa va autentificati accesand urmatorul buton:
PRODUSE ASEMANATOARE CU PALMER RIVER ELDE - PASSIVE 2-CHANNEL DI-BOX
