Dynacord LX 3000 amplificator
Tip produs: amplificator profesional | amplificatoare profesionale | aplificatoare audioProducator: Dynacord
3% reducere pentru contactele prin clubafaceri.ro
Prezentare Dynacord LX 3000 amplificator
The new flagship of the LX series delivers a mighty 2 x 2100 watts into 2 ohms and 2 x 1500 watts into 4 ohms and therefore has plenty of headroom for large subwoofer arrays. For decades, DYNACORD has been one of the leading manufacturers in the pro audio sector and has established a secure position in the amplifier market thanks to the excellent audio performance,absolute reliability and high stability of the Linear Precision series. With their outstanding operational security, which guarantees years of problem-free use, the amplifiers of the Linear Precision series are now the standard for a wide variety of full-range and multi-way loudspeakers systems in professional venues as diverse as theatres, stadiums, discotheques, clubs and concert halls.
Load Impedance
2 O, 4 O, 8 O
Max. Midband Output Power, THD = 1%, 1kHz
2 O - 2100 W, 4 O - 1500 W, 8 O - 900 W
Rated Output Power, THD < 0.1%, 20Hz … 20kHz
W, 4 O - 1200 W, 8 O - 900 W
Max. Single Channel Output Power, Dynamic Headroom, IHF-A
2 O - 2900 W, 4 O - 1800 W, 8 O - 1000 W
Max. Single Channel Output Power, Continuous, 1kHz
2 O - 2600 W, 4 O - 1700 W, 8 O - 950 W
Max. Bridged Output Power, THD = 1%, 1kHz
W, 4 O - 4200 W, 8 O - 3000 W
Maximum RMS Voltage Swing, THD = 1%, 1kHz
95 V
Power Bandwith, ref. 1kHz, THD =1%, half power @ 4 ohms
10Hz … 60kHz
Voltage Gain, ref. 1kHz
32.0 dB
Input Sensitivity, rated power @ 8 ohms, 1kHz
+7.0 dBu (1.74 V rms)
THD at rated output power, MBW = 80kHz, 1kHz
< 0.05%
IMD-SMPTE, 60Hz, 7kHz
< 0.02%
DIM 30, 3,15kHz, 15kHz
< 0.05%
Maximum Input Level
+22 dBu (9.76 V rms)
Crosstalk, ref. 1kHz, at rated output power
< -80 dB
Frequency Response, ref 1kHz
15Hz … 40kHz (-1dB)
Input Impedance, active balanced
20 kohms
Damping Factor, 1kHz
> 300
Slew Rate
38 V/µs
Signal to Noise Ratio, A-weighted
108 dB
Output Stage Topology
Class H
Power Requirements
100V, 120V, 220V, 230V, 240 V; 50Hz … 60Hz (factory configured)
Power Consumption, 1/8 max. output power @ 4 ohms
1070 W
Protection
Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak current Limiters Inrush Current Limiters, Turn-On delay
Cooling
Front-to rear, 3-stage fans
Ambient Temperature Limits
+5° … +40° ( 40°F … 105°F )
Safety Class
I
Dimensions ( W x H x D ) mm
483 x 88.1 x 384
Weight
8.70 kg (19.2 lbs)
Optional Accessories
Rear Rackmount 15.5" D112 930 (RMS15-CL), Rear Rackmount 18.0" D112 933 (RMS18-CL), LPN + Lo-Cut Filter D112963 (NRS 90268)
S********************
va rugam sa va autentificati accesand urmatorul buton: