Amplificator Powersoft Duecanali 6404 DSP+D 6400W/2-channel Amplifier with DSP and Dante™
Tip produs: echipamente audio | echipamente dj | echipamente audio constantaProducator: Powersoft Audio
1% reducere pentru contactele prin clubafaceri.ro
Prezentare Amplificator Powersoft Duecanali 6404 DSP+D 6400W/2-channel Amplifier with DSP and Dante™
Providing access to all yet easily set up, the Duecanali Series is versatile in use. Powersoft\'s legendary efficiency saves valuable energy, keeping both operational cost and ‘carbon footprint’ at a minimum.
The Duecanali 6404 DSP+D is designed to work with Lo-Z (from 2 Ω ) and with 70V/100V distributed lines: any mixed impedance output loads can be realized.
A fully integrated state-of-the-art DSP yields extensive system management functionality. In addition to sound shaping and limiter functions in unique Powersoft style, the DSP hardware and ArmoníaPlus software enable compliance with IEC 60849 for the crucial requirements of sound systems for emergency purposes.
Power supply
Patented output filter with ripple cancellation network
Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
Protections
Fully protected circuit design with:
Ac protection: shut down power supply when AC mains voltage is outside operating range
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
DC protection: protects against infrasonic signal at the outputs
VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
Long term limiter: protects the loudspeaker against steady long term rms (non audio) signals reducing maximum output
Thermal protection: output stages operating temperature up to 80 °C (176 °F)
Temperature controlled continous variable speed fan, front to back airflow
Temperature forecast with LCD traced historical behaviour
General
Fixed frequency switchmode output stage for high grade sound accuracy
Compact size - all models only 1 RU for reduced rack cost and space
Light weight - for easier racking and shipping: 7 kg (15.4 lbs)
Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
Remotely switchable double input (main and aux) per channel
Loudspeaker system configuration
Direct drive either low impedance loads or 70V / 100V Hi-Z distributed lines
Switchable 35Hz / 70Hz high pass filter per channel
Mixed configuration with Lo-Z/Hi-Z systems possible
Bridged mode low impedance per channel pair
Alarms and GPI/O
NC/NO contacts per channel for alarm notifications
Remote ON/OFF switch
Remote VCA control per channel
Digital Signal Processing
TI C6000 DSP platform
AD/DA converter: dual 24bit @ 48 kHz Tandem® architecture
Input/output independent equalizers per channel providing PEQ, raised cosine, shelving IIR filters as well as custom output FIR filters
Delay up to 100 ms for time alignment
Active DampingControl™ for cable compensation
Peak, RMS voltage, RMS current, TruePower™ limiters
Remote Control & Monitoring
Via software:
Control and diagnostics monitoring via ArmoniaPlus
Dedicated WebApp
Via Hardware:
Attenuation (from 0dB to 26dB)
High-pass filters (35Hz, 70Hz)
Lo-Z/Hi-Z/70V/100V output selection
Adjustable gain (from 26dB to 35 dB)
Date tehnice:
GENERAL
Output power per Channel
Output power per Channel
4600 W @ 2 Ω
3200 W @ 4 Ω
1800 W @ 8 Ω
Bridge mode
9200 W @ 4 Ω
6400 W @ 8 Ω
Max output voltage / current
Maxunclipped output voltage @8 Ω
175 Vpeak
Current
110 Apeak
AC MAIN POWER
Power supply
Universal, regulated switch mode with PFC (Power Factor Correction)
Nominal power requirement
100-240 V ±10%, 50-60 Hz
Operating voltage
90 V – 264 V
Power consumption /current draw
Idle
115 V: 33 W – 0.53 A
230 V: 33 W – 0.37 A
1/8 of max output power @ 4 Ω
115 V: 1073 W – 10 A
230 V: 1068 W – 5.3 A
THERMAL
Operating temperature range
0° – 45° C – 32° – 113° F
Thermal dissipation
Idle
115 V: 112 BTU/h
230 V: 114 BTU/h
1/8 of max output power @ 4 Ω
115 V: 931 BTU/h
230 V: 913 BTU/h
Pentru a vizualiza datele companiei
S**************************
va rugam sa va autentificati accesand urmatorul buton:
LoginS**************************
va rugam sa va autentificati accesand urmatorul buton:
PRODUSE ASEMANATOARE CU AMPLIFICATOR POWERSOFT DUECANALI 6404 DSP+D 6400W/2-CHANNEL AMPLIFIER WITH DSP AND DANTE™
Amplificator Powersoft Duecanali 1604 DS...
Providing access to all functions yet easily set up, the Duecanali Series is versatile in use. Powersoft's legendary ...
RON 11666.88
Amplificator Duecanali 4804 DSP+D
OVERVIEW CHART
This amplifier platform is ideal for medium to large sized installations that require high power ...
RON 17352.26
Amplificator Powersoft Duecanali 1604 + ...
Providing access to all functions yet easily set up, the Duecanali Series is versatile in use. Powersoft's legendary ...
RON 11163.49
Amplificator Powersoft T904
The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor.
The T904 is ...
RON 26058
Amplificator Powersoft T602
2-Channel High-Performaqnce Amplifier Platform with DSP and Dante™
The T ...
RON 18062.94
Amplificator Powersoft T302
OVERVIEW CHART
The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.
All ...
RON 14628.02
Amplificator Powersoft T604
The T Series is a very flexible and cost effective amplifier platform loudspeaker ...
RON 21497.85
Amplificator Powersoft T902
Overview
The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor.
All ...
RON 21497.85
Amplificator Powersoft Quattrocanali 880...
Amplificator Powersoft Quattrocanali 8804 DSP+D 8800W/4-channel Amplifier with DSP and Dante™
Quattrocanali ...
RON 24162.88