Tannoy VQ MB boxa de club pasiva

Duplicating the low frequency performance of the VQ 60 & VQ 100 full range loudspeakers, the VQ MB is intended for use as a flown or ground stacked, high power low/mid frequency module used in conjunction with full range or mid/high systems in the VQ series. Two (12”) low frequency transducers, offer high power handling and low power compression for high continuous SPL capability. A newly designed LF loading design provides the highest possible sensitivity for low/mid frequency output (105dB/w).



The VQ MB is principally intended for use with the VQ 60 & VQ 100 full range systems to construct arrays with extended low frequency pattern control. By fixing a VQ MB at the opposing end of a VQ full range loudspeaker we can effectively extend pattern control to below the cutoff point of the Mid/High PSW waveguide.



Technical Information



VQ MB

PERFORMANCE

System Type Mid Bass - Vented

Frequency Response (-3dB) 1 115Hz - 500Hz

Frequency Range (-10dB) 1 90Hz - 600Hz

System Sensitivity & Operating Freq.

(1W @1m) 2 105dB (2.0V @ 4ohms)

Driver Complement 2 x 300mm (12.00”) Low Frequency Transducers, Semi Horn Loaded

Rated Maximum SPL 2 135dB (average) 141dB (peak)

Power Handling 3 Average Programme

1000W (63.3V) 2000W

Recommended Amplifier Power 2000W into 4ohms

Nominal Impedance 4ohms (4.1 ohms Minimum)

CONSTRUCTION

Enclosure 18mm (0.71") birch plywood. Vented and internally braced.

Finish Textured black or white paint

(custom colours on request).

Powder coated perforated steel grille.

Connectors Barrier Strip & 1 x NL4

Fittings 2 x Recessed carrying handles

12 x M10 flying inserts

Dimensions 433mm x 694mm x 515mm

(17.05" x 27.32" x 20.28")

Weight 37.0kg (81.6lbs)