JB Systems LED Expo Beam

\r\n Very powerful white LED projector, based on 36 high power 1W LEDs (28 white + 8 amber)
\r\n The use of amber LEDs makes it possible to change the color temperature of the light. (cool to warm white)
\r\n White/amber calibration
\r\n Perfect alternative for traditional PAR64 projectors: only 65Watt power consumption + no need for heavy dimmer packs!
\r\n The use of LED Technology makes important energy (cost) savings possible compared to units based on halogen lamps!
\r\n Thanks to the waterproof IP65 housing , this LED projector is your first choice:
\r\n To illuminate all kinds buildings like: hotels, shops, discotheques, public & amusement parks, fairground attractions, ...
\r\n To light up small, medium and large stages
\r\n The 400Hz LED scan rate makes it also a perfect choice in TV studios (no interferences with TV-cameras)
\r\n Completely silent: the projector is cooled by natural air convection so no noisy fans are needed!
\r\n The lightweight aluminium housing uses a double hanging bracket so it can also be used as floor projector.
\r\n Can be used:
\r\n In standalone mode with the special pre-programmed PB-01 controller (with internal clock)
\r\n In standalone mode with its internal automatic programs
\r\n With any standard DMX-controller (2ch, 3ch or 6ch modes available)
\r\n Menu driven LED-display with password protection on the rear panel
\r\n
\r\n Technical Information
\r\n
\r\n Voltage: 90 - 250V (50 or 60Hz)
\r\n Rated power: only 65W
\r\n IP rating: IP65
\r\n LED n°: 36x 1Watt (28 white + 8 amber)
\r\n Beam angle: 30°
\r\n Dimensions: 24 x 17 x 30cm
\r\n Weight: 4,0kg
\r\n Light output (W+A @ 100%):
\r\n Distance = 2m: 3262 lux
\r\n Distance = 4m: 856 lux
\r\n Distance = 6m: 396 lux
\r\n Distance = 8m: 237 lux
\r\n Distance = 10m: 155 lux