Fender TB-600C Pro Combo (600 W)
Producator: Fender3% reducere pentru contactele prin clubafaceri.ro
Prezentare Fender TB-600C Pro Combo (600 W)
The PRO series TB-600C Combo provides 600 watts of power with total tonal finesse and versatility to produce thick, natural and balanced Fender bass tone that sits perfectly in the mix, be it recording studio, club gig or concert stage. Based on the acclaimed TBP-1 tube bass preamp, the key to its sound is the passive tone stack-the backbone of classic Fender guitar and bass amps-in which each control knob setting affects the sound of the other controls, producing big, warn notes that are the natural sound of a bass guitar. An overdrive section (Gain, Volume and Blend) sits on top of the clean channel, allowing you to dial in tones from a subtle grind to full on overdrive. Vari-Q™ is a smart semi-parametric EQ with a user selectable frequency and a cut/boost of 15 dB. When boosting frequencies, it automatically WIDENS the focus of the Q for a broader, more musical boost. When cutting frequencies, it automatically NARROWS the focus of the Q for a well-defined cut (notch). This intelligent Q control keeps “on the fly” operation simple and effective. Room Balance is a global EQ shift for cabinets/ stage response. Clockwise turn cuts lower end frequencies while simultaneously raising upper frequencies. Counter-clockwise brings up lower end frequencies while simultaneously lowering upper frequencies. This knob does not affect the XLR out, so you can “dial in the stage” while giving the soundman an unaltered signal. This combo comes complete; mounted in a portable enclosure that also boasts two 10” Fender Special Design Eminence® cast-frame speakers and a Foster® high-frequency compression driver horn with rear attenuator. Free your mind and your bass will follow
Model Name
TB-600C
Model Number
224-6000-000 (120V, 60Hz) USA
224-6001-000 (110V, 60Hz) TW
224-6003-000 (240V, 50Hz) AUS
224-6004-000 (230V, 50Hz) UK
224-6005-000 (220V, 50Hz) ARG
224-6006-000 (230V, 50Hz) EUR
224-6007-000 (100V, 50Hz) JPN
Series
PRO Series
Type
Tube Bass Combo
Output
400 watts @ 8 ohms (Internal), 600 watts @ 4 ohms (with 8 ohm Extension Cabinet)
Ohms
8 ohms Internal (4 ohms Minimum)
Speakers
2-10" Fender® Special Design Cast Frame Eminence® 16 ohm Speakers, p/n 0064461000,
1- Foster® Horn, p/n 0048847000
Channels
1 Channel
Features
Front Panel Feature Set:
*Fender® passive tone stack (remember passive means CUT ONLY)
-Delivers that creamy tube tone
-Volume, Bass, Mid & Treble controls for the "clean" sound
*Tube Overdrive section
-Gain, Volume and Blend
-This channel sits on top of the clean (which preserves the warm clean pillow under the overdrive)
-Blend adjusts the clean vs. dirty ratio of the tone (can be set "touch-sensitive")
-Footswitchable (4-button footswitch sold separately)
*Vari-Q™ section - A smart semi-parametric EQ
-Cutting frequencies automatically NARROWS the focus of the Q for a well-defined cut (notch)
-Boosting frequencies automatically WIDENS the focus of the Q for a broader, more musical boost
-This intelligent Q control keeps "on the fly" operation simple and effective
-Footswitchable (4-button footswitch sold separately)
*Room Balance - Global EQ shift for cabinets/stage response
-Clockwise cuts lower end frequencies while simultaneously raising upper frequencies
-Counter-clockwise brings up lower end frequencies while simultaneously lowering upper frequencies
-Room Balance Does NOT affect XLR output (soundman gets unaltered signal)
*Master Volume - One level control that affects everything except Balanced Line Out, Tuner and FX Send
*Mute
-Cuts all signal except for the Tuner & FX send
-Footswitchable (4-button footswitch sold separately)
Rear Panel Feature Set:
*Balanced Line Output is a true electronically balanced XLR output with Ground Lift, Pre/Post switches and Level control, for maintaining a clean balanced line output signal
*Tuner Output (post-tube, always on, even when the MUTE is engaged)
*Effects Loop with trim control and level switch (can be used as an adjustable boost control) - Footswitchable
*Full-Range 1/4" and Speakon speaker output jacks
*Footswitch input (Footswitch sold separately)
*Additional Instrument Input on the back (in case your rack setup favors having an input in the back)
Controls
Front Panel: Vintage Tube Tone:
Input -9dB Pad Switch,
Mute,
Volume,
Bass w/Deep Switch (Pull to Activate),
Mid,
Treble w/Bright Switch (Pull to Activate),
Tube Overdrive:
(Enable/Disable Switch),
Gain,
Volume,
Blend
Vari-Q™:
(Enable/Disable Switch),
Frequency,
Level/Q,
Room Balance,
Master Volume,
Rear Panel: Balanced Line Output with Ground Lift,
XLR Jack,
Level,
Pre/Post EQ Select Switch,
FX Loop with Trim,
+4dBu/-10dBv level switch,
Send/Return Jacks
Covering
Black Textured Vinyl Covering with Black Metal Grille and Nickel Corners
Weight
102 lb. (46.3 kg)
Dimensions
Height: 25.5" (57.2 cm),
Width: 23.5" (59.7 cm),
Depth: 16.5" (41.9 cm)
Power Handling
N/A
Tube Complement
2 X 12AX7
Cover
Uses Cover, p/n 0074979000, $34.99, (Not Included)
Accessories
Casters
Footswitch
TBFS-4, 4-Button Footswitch with Built-in Tuner sold separately P/N: 0070683000,
(4-buttons control: Overdrive, FX Loop, Vari-Q™ and Mute)
Introduced
6/2008
Notice
Product Prices, Features, Specifications and Availability Are Subject To Change Without Notice
S********************
va rugam sa va autentificati accesand urmatorul buton: