ProCurve Switch 3500yl-24G-PWR Intel Edge, J8692A Ports � 1 open module slot 20 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T) Media Type: Auto-MDIX Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) Supports a maximum of 4 10-GbE ports, with optional module 1 open module slot 20 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T) Media Type: Auto-MDIX Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only 1 RJ-45 serial console port 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) Supports a maximum of 4 10-GbE ports 1 open module slot 44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T) Media Type: Auto-MDIX Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) Supports a maximum of 4 10-GbE ports, with optional module Physical characteristics Dimensions 15.43(d) x 17.44(w) x 1.73(h) in. (39.2 x 44.3 x 4.4 cm) (1U height) 15.43(d) x 17.44(w) x 1.73(h) in. (39.2 x 44.3 x 4.4 cm) (1U height) 16.93(d) x 17.44(w) x 1.73(h) in. (43.0 x 44.3 x 4.4 cm) (1U height) Weight 14.11 lb. (6.4 kg) 13.86 lb. (6.29 kg) 16.09 lb. (7.3 kg) Memory and processor 10G Module ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM Management Module Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash Mb, 128 MB compact flash, 256 MB DDR SDRAM Mounting � Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only Performance 1000 Mb Latency < 3.4 �s (FIFO 64-byte packets) < 3.4 �s (FIFO 64-byte packets) < 3.4 �s (FIFO 64-byte packets) 10 Gbps Latency < 2.1 �s (FIFO 64-byte packets) < 2.1 �s (FIFO 64-byte packets) < 2.1 �s (FIFO 64-byte packets) Throughput up to 75.7 million pps up to 75.7 million pps up to 111.5 million pps Routing/Switching capacity 101.8 Gbps 101.8 Gbps 149.8 Gbps Switch fabric speed 105.6 Gbps 105.6 Gbps 153.6 Gbps Routing table size 10,000 entries 10,000 entries 10,000 entries MAC address table size 64,000 entries 64,000 entries 64,000 entries Environment Operating temperature 32�F to 131�F (0�C to 55�C); 32�F to 104�F (40�C) when used with any X2 10-GbE 32�F to 131�F (0�C to 55�C); 32�F to 104�F (40�C) when used with any X2 10-GbE 32�F to 131�F (0�C to 55�C); 32�F to 104�F (40�C) when used with any X2 10-GbE Operating relative humidity 15% to 95% @ 104�F (40�C), non-condensing 15% to 95% @ 104�F (40�C), non-condensing 15% to 95% @ 104�F (40�C), non-condensing Non-operating/Storage temperature -40�F to 158�F (-40�C to 70�C) -40�F to 158�F (-40�C to 70�C) -40�F to 158�F (-40�C to 70�C) Non-operating/Storage relative humidity 15% to 90% @ 149�F (65�C), non-condensing 15% to 90% @ 149�F (65�C), non-condensing 15% to 95% @ 149�F (65�C), non-condensing Altitude up to 15,000 ft. (4.6 km) up to 15,000 ft. (4.6 km) up to 15,000 ft. (4.6 km) Acoustic Power: 55.1 dB, Pressure: 44.8 dB ISO 7779, ISO 9296 Power: 57.0 dB, Pressure: 40.5 dB ISO 7779, ISO 9296 Power: 55.6 dB, Pressure: 45.3 dB ISO 7779, ISO 9296 Electrical characteristics � � � Achieved Miercom Certified Green Award Description The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz The switch automatically adjusts to any voltage between 100-127 and 200-240 volts with either 50 or 60 Hz Maximum heat dissipation 865 BTU/hr (912.9 kJ/hr) 865 BTU/hr (912.9 kJ/hr) 1144 BTU/hr (1206.9 kJ/hr) Voltage 100-127 / 200-240 VAC 100-127 / 200-240 VAC 100-127 / 200-240 VAC Current 10.0 / 5.0 A 6.6 / 3.0 A 10.0 / 5.0 A Idle power 98 W 94 W 142 W Maximum power rating 623 W 616 W 705 W PoE power 398 W 398 W 398 W Frequency 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz Notes Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. The amount of PoE power delivered is dependent on the number and type of power supplies connected. The switches offer optional external power supplies (EPS) for maximum PoE power. Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. The amount of PoE power delivered is dependent on the number and type of power supplies connected. The switches offer optional external power supplies (EPS) for maximum PoE power. Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. The amount of PoE power delivered is dependent on the number and type of power supplies connected. The switches offer optional external power supplies (EPS) for maximum PoE power. Safety � CSA 22.2 No. 60950 UL 60950 IEC 60950 EN 60950 CSA 22.2 No. 60950 UL 60950 IEC 60950 EN 60950 CSA 22.2 No. 60950 UL 60950 IEC 60950 EN 60950 Notes � When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. �Return to top � HP ProCurve 3500yl-48G-PoE+ Switch (J9311A) HP ProCurve 3500-24 Switch (J9470A) HP ProCurve 3500-24-PoE Switch (J9471A) Ports � 1 open module slot 44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T) Media Type: Auto-MDIX Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only 1 RJ-45 serial console port 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) Supports a maximum of 4 10-GbE ports 20 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX) Media Type: Auto-MDIX Duplex: half or full 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers) 1 RS-232C DB-9 console port 20 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX) Media Type: Auto-MDIX Duplex: half or full 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers) 1 RS-232C DB-9 console port Physical characteristics Dimensions 16.93(d) x 17.44(w) x 1.73(h) in. (43.0 x 44.3 x 4.4 cm) (1U height) 15.43(d) x 17.44(w) x 1.73(h) in. (39.2 x 44.3 x 4.4 cm) (1U height) 15.43(d) x 17.44(w) x 1.73(h) in. (39.2 x 44.3 x 4.4 cm) (1U height) Weight 15.54 lb. (7.05 kg) 11.9 lb. (5.4 kg) 13.23 lb. (6 kg) Memory and processor 10G Module ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM � � Management Module Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash Mb, 128 MB compact flash, 256 MB DDR SDRAM Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM Mounting � Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only Performance 100 Mb Latency � < 3.4 �s (LIFO 64-byte packets) < 3.4 �s (LIFO 64-byte packets) 1000 Mb Latency < 3.4 �s (FIFO 64-byte packets) < 2.9 �s (LIFO 64-byte packets) < 2.9 �s (LIFO 64-byte packets) 10 Gbps Latency < 2.1 �s (FIFO 64-byte packets) � � Throughput up to 111.5 million pps up to 8.9 million pps (64-byte packets) up to 8.9 million pps (64-byte packets) Routing/Switching capacity 149.8 Gbps 12 Gbps 12 Gbps Switch fabric speed 153.6 Gbps � � Routing table size 10,000 entries 10,000 entries 10,000 entries MAC address table size 64,000 entries 64,000 entries 64,000 entries Environment Operating temperature 32�F to 131�F (0�C to 55�C); 32�F to 104�F (40�C) when used with any SFP+ 10-GbE 32�F to 131�F (0�C to 55�C) 32�F to 131�F (0�C to 55�C) Operating relative humidity 15% to 95% @ 104�F (40�C), non-condensing 15% to 95% @ 104�F (40�C), non-condensing 15% to 95% @ 104�F (40�C), non-condensing Non-operating/Storage temperature -40�F to 158�F (-40�C to 70�C) -40�F to 158�F (-40�C to 70�C) -40�F to 158�F (-40�C to 70�C) Non-operating/Storage relative humidity 15% to 95% @ 149�F (65�C), non-condensing 15% to 90% @ 149�F (65�C), non-condensing 15% to 90% @ 149�F (65�C), non-condensing Altitude up to 15,000 ft. (4.6 km) up to 15,000 ft. (4.6 km) up to 15,000 ft. (4.6 km) Acoustic Power: 58.0 dB, Pressure: 42.0 dB ISO 7779, ISO 9296 Power: 53.1 dB, Pressure: 42.6 dB ISO 7779, ISO 9296 Power: 55.1 dB, Pressure: 44.8 dB ISO 7779, ISO 9296 Electrical characteristics Description The switch automatically adjusts to any voltage between 100-127 and 200-240 volts with either 50 or 60 Hz The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz Maximum heat dissipation 1144 BTU/hr (1206.9 kJ/hr) 268 BTU/hr (282.8 kJ/hr) 435 BTU/hr (458.92 kJ/hr) Voltage 100-127 / 200-240 VAC 100-127 / 200-240 VAC 100-127 / 200-240 VAC Current 7.3 / 3.3 A 1.1 / 0.6 A 6.6 / 3.0 A Idle power 132 W 68.2 W 91 W Maximum power rating 638 W 78.7 W 497 W PoE power 398 W � 398 W Frequency 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz Notes Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. The amount of PoE power delivered is dependent on the number and type of power supplies connected. The switches offer optional external power supplies (EPS) for maximum PoE power. Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. The amount of PoE power delivered is dependent on the number and type of power supplies connected. The switches offer optional external power supplies (EPS) for maximum PoE power. Safety � CSA 22.2 No. 60950 UL 60950 IEC 60950 EN 60950 CSA 22.2 No. 60950 UL 60950 IEC 60950 EN 60950 EN 60950/IEC 60950 CAN/CSA 22.2 No. 60950 EN 60825 UL 60950 Notes � When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. �Return to top � HP ProCurve 3500-48 Switch (J9472A) HP ProCurve 3500-48-PoE Switch (J9473A) Ports � 44 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX) Media Type: Auto-MDIX Duplex: half or full 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) 1 RS-232C DB-9 console port 44 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX) Media Type: Auto-MDIX Duplex: half or full 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) 1 RS-232C DB-9 console port Physical characteristics Dimensions 16.93(d) x 17.44(w) x 1.73(h) in. (43.0 x 44.3 x 4.4 cm) (1U height) 16.93(d) x 17.44(w) x 1.73(h) in. (43.0 x 44.3 x 4.4 cm) (1U height) Weight 13.45 lb. (6.1 kg) 14.99 lb. (6.8 kg) Memory and processor Management Module Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash Mb, 128 MB compact flash, 256 MB DDR SDRAM Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash Mb, 128 MB compact flash, 256 MB DDR SDRAM Mounting � Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only Performance 100 Mb Latency < 3.4 �s (LIFO 64-byte packets) < 3.4 �s (LIFO 64-byte packets) 1000 Mb Latency < 2.9 �s (LIFO 64-byte packets) < 2.9 �s (LIFO 64-byte packets) Throughput up to 12.5 million pps (64-byte packets) up to 12.5 million pps (64-byte packets) Routing/Switching capacity 16.8 Gbps 16.8 Gbps Routing table size 10,000 entries 10,000 entries MAC address table size 64,000 entries 64,000 entries Environment Operating temperature 32�F to 131�F (0�C to 55�C) 32�F to 131�F (0�C to 55�C) Operating relative humidity 15% to 95% @ 104�F (40�C), non-condensing 15% to 95% @ 104�F (40�C), non-condensing Non-operating/Storage temperature -40�F to 158�F (-40�C to 70�C) -40�F to 158�F (-40�C to 70�C) Non-operating/Storage relative humidity 15% to 95% @ 149�F (65�C), non-condensing 15% to 95% @ 149�F (65�C), non-condensing Altitude up to 15,000 ft. (4.6 km) up to 15,000 ft. (4.6 km) Acoustic Power: 55.8 dB, Pressure: 43.5 dB ISO 7779, ISO 9296 Power: 55.6 dB, Pressure: 45.3 dB ISO 7779, ISO 9296 Electrical characteristics Description The switch automatically adjusts to any voltage between 100-127 and 200-240 volts with either 50 or 60 Hz The switch automatically adjusts to any voltage between 100-127 and 200-240 volts with either 50 or 60 Hz Maximum heat dissipation 465 BTU/hr (490.58 kJ/hr) 611 BTU/hr (644.6 kJ/hr) Voltage 100-127 / 200-240 VAC 100-127 / 200-240 VAC Current 1.6 / 0.8 A 7.3 / 3.3 A Idle power 96 W 133.2 W Maximum power rating 136.2 W 548.8 W PoE power � 398 W Frequency 50 / 60 Hz 50 / 60 Hz Notes Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. The amount of PoE power delivered is dependent on the number and type of power supplies connected. The switches offer optional external power supplies (EPS) for maximum PoE power. Safety � EN 60950/IEC 60950 CAN/CSA 22.2 No. 60950 UL 60950 IEC 60950 EN 60950/IEC 60950 CAN/CSA 22.2 No. 60950 UL 60950 IEC 60950 Notes � When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. �Return to topStandard specifications across all modelsEmissionsFCC Class A; VCCI Class A; EN 55022/CISPR 22 Class AImmunityEN: EN 55024, CISPR 24ESD: IEC 61000-4-2; 4 kV CD, 8 kV ADRadiated: IEC 61000-4-3; 3 V/mEFT/Burst: IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)Surge: IEC 61000-4-5; 1 kV/2 kV ACConducted: IEC 61000-4-6; 3 VPower frequency magnetic field: IEC 61000-4-8; 1 A/m, 50 or 60 HzVoltage dips and interruptions: IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periodsHarmonics: EN 61000-3-2, IEC 61000-3-2Flicker: EN 61000-3-3, IEC 61000-3-3ManagementHP ProCurve Manager Plus; HP ProCurve Manager (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C)Standards and protocols Device management RFC 1591 DNS (client) HTML and telnet management General protocols IEEE 802.1ad Q-in-Q (Premium License) IEEE 802.1D MAC Bridges IEEE 802.1p Priority IEEE 802.1Q VLANs IEEE 802.1s Multiple Spanning Trees IEEE 802.1v VLAN classification by Protocol and Port IEEE 802.1w Rapid Reconfiguration of Spanning Tree IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.3af Power over Ethernet IEEE 802.3x Flow Control RFC 768 UDP RFC 783 TFTP Protocol (revision 2) RFC 792 ICMP RFC 793 TCP UDLD (Uni-directional Link Detection) RFC 826 ARP RFC 854 TELNET RFC 868 Time Protocol RFC 951 BOOTP RFC 1058 RIPv1 RFC 1350 TFTP Protocol (revision 2) RFC 1519 CIDR RFC 1542 BOOTP Extensions RFC 2030 Simple Network Time Protocol (SNTP) v4 RFC 2131 DHCP RFC 2453 RIPv2 RFC 2548 (MS-RAS-Vendor only) RFC 3046 DHCP Relay Agent Information Option RFC 3576 Ext to RADIUS (CoA only) RFC 3768 VRRP (Premium License) RFC 4675 RADIUS VLAN & Priority IP multicast RFC 3376 IGMPv3 (host joins only) RFC 3973 Draft 2 PIM Dense Mode (Premium License) RFC 4601 Draft 10 PIM Sparse Mode (Premium License) IPv6 RFC 1981 IPv6 Path MTU Discovery RFC 2460 IPv6 Specification RFC 2710 Multicast Listener Discovery (MLD) for IPv6 RFC 2925 Remote Operations MIB (Ping only) RFC 3019 MLDv1 MIB RFC 3315 DHCPv6 (client only) RFC 3513 IPv6 Addressing Architecture RFC 3596 DNS Extension for IPv6 RFC 3810 MLDv2 (host joins only) RFC 4022 MIB for TCP RFC 4113 MIB for UDP RFC 4251 SSHv6 Architecture RFC 4252 SSHv6 Authentication RFC 4253 SSHv6 Transport Layer RFC 4254 SSHv6 Connection RFC 4293 MIB for IP RFC 4419 Key Exchange for SSH RFC 4443 ICMPv6 RFC 4541 IGMP & MLD Snooping Switch RFC 4861 IPv6 Neighbor Discovery RFC 4862 IPv6 Stateless Address Auto-configuration MIBs RFC 1213 MIB II RFC 1493 Bridge MIB RFC 1724 RIPv2 MIB RFC 1850 OSPFv2 MIB RFC 2021 RMONv2 MIB RFC 2096 IP Forwarding Table MIB RFC 2613 SMON MIB RFC 2618 RADIUS Client MIB RFC 2620 RADIUS Accounting MIB RFC 2665 Ethernet-Like-MIB RFC 2668 802.3 MAU MIB RFC 2674 802.1p and IEEE 802.1Q Bridge MIB RFC 2737 Entity MIB (Version 2) RFC 2787 VRRP MIB RFC 2863 The Interfaces Group MIB RFC 2925 Ping MIB Network management IEEE 802.1AB Link Layer Discovery Protocol (LLDP) RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events) RFC 3176 sFlow ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED) SNMPv1/v2c/v3 XRMON OSPF RFC 2328 OSPFv2 (Premium License) RFC 3101 OSPF NSSA QoS/Cos RFC 2474 DiffServ Precedence, including 8 queues/port RFC 2597 DiffServ Assured Forwarding (AF) RFC 2598 DiffServ Expedited Forwarding (EF) Security IEEE 802.1X Port Based Network Access Control RFC 1492 TACACS+ RFC 2865 RADIUS (client only) RFC 2866 RADIUS Accounting Secure Sockets Layer (SSL) SSHv1/SSHv2 Secure Shell
